Multi jet Dry Dial Water Meter with External Adjust LXSG-B4
Multi-jet Dry Type Vane Wheel Water meter with External Adjust
Model No.: LXSG-B4
Features
a.Dry dial with external adjust
Wet dial with internal adjust (optional)
b.H-R80 /R100 /160,Class B
c.Water temperature: T50 or T90
d.Water pressure: MAP10 or MAP16
e.Magnetic transmission, anti-magnetic protection
f.Availible with pulse output, with reed switch
Detailed information
Multi-jet Dry Type Vane Wheel COLD/HOT Water meter with External Adjust
With external regulating device
Magnetic drive, lower transmission resistance
Magnetic shield, use for external magnetic field protection
Evacuated and sealed dry dial register ensures clear reading
Central strainer
Inlet strainer
There are two versions DN50 meter body to be chosen: With threaded ends or flanged ends
Compliance with Standard
Technical data conforms to ISO 4064 Class B Standard for horizontal installation
Options
Meter with non return valve(different price) is available except ECO- LXSCE DN15-50
Meter for hot water up to 90°is available
Meter equipped with reed switch is available
Installation Requirements
The meter should be installed in horizontal position with the register face upwards
Pipeline must be flushed before installation
The meter should be constantly full of water during operation
Application
Measuring the volume of cold potable water passing through the pipeline
Working Conditions
Water temperature: ≤40ºC
Water pressure: ≤1.6MPa
Please Attention:
1.If you want to get samples and catalogue from us, please contact us at info@sinoeco.com Normally, we need 7-15 days for making samples. and you need to pay for them. However, it would be highly appreciated if you can accept freight collect.
2.We normally need 20-35 days for production,however,please contact us if urgent
3.We ar OEM,ODM supplier,Wesupport FOB,CFR,DIF price term, and often ship from SHANGHAI or NINGBO sea port.
4.We encourage payment term:T/T or irrevocable L/C at sight, or 30% T/T deposit and 70% balance when receipt of advice of shipment.
5.Before installing the meter, we had better make sure that, it has been chosen correctly, check that the nominal diameter, flow rate, working temperature and pressure are compatible with the installation conditions.
Contact
Enquiry
Add: 608, 1501 Tiantong Road N., Ningbo 315100, China
Tel: 0086 574 87065432 Fax: 0086 574 87756802
www.sinoeco.com info@sinoeco.com
Skype: sinoeco.com
Copyright © Ningbo Free Trade Zone ECO International Co., Ltd
ECO Solutions, good quality, good service
