Single Jet Liquid Sealed Impulse Water Meter R160 LXS-FDF
Single jet Liquid sealed plastic Water Meter
Model: LXS-FDF
Features
1. The register is contained in a liquid filled sealed housing which is not subject to discoloration by scale, dirt or any deposit
2. Wet dial
3. Mechanical transmission movement equates to maximum reliability
4. Inlet strainer
5. Particularly suited in lower quality water
6.Technical data conforms to ISO 4064 Class B Standard for horizontal installation
Working Conditions
Water temperature : ≤ 40 ºC
Water pressure: ≤ 1.6 MPa
Meter equipped with reed switch is available
Installation Requirements
1.The meter should be installed in horizontal position with the register face upwards
2.Pipeline must be flushed before installation
3.The meter should be constantly full of water during operation
Please Attention:
1.If you want to get samples and catalogue from us, please contact us at info@sinoeco.com Normally, we need 7-15 days for making samples. and you need to pay for them. However, it would be highly appreciated if you can accept freight collect.
2.We normally need 20-35 days for production,however,please contact us if urgent
3.We ar OEM,ODM supplier,Wesupport FOB,CFR,DIF price term, and often ship from SHANGHAI or NINGBO sea port.
4.We encourage payment term:T/T or irrevocable L/C at sight, or 30% T/T deposit and 70% balance when receipt of advice of shipment.
5.Before installing the meter, we had better make sure that, it has been chosen correctly, check that the nominal diameter, flow rate, working temperature and pressure are compatible with the installation conditions.
Contact
Enquiry
Add: 608, 1501 Tiantong Road N., Ningbo 315100, China
Tel: 0086 574 87065432 Fax: 0086 574 87756802
www.sinoeco.com info@sinoeco.com
Skype: sinoeco.com
Copyright © Ningbo Free Trade Zone ECO International Co., Ltd
ECO Solutions, good quality, good service
