• EMAIL:info@sinoeco.com
  • EN RU PT

Single Jet Dry Dial Class C Hot Water Meter LXSC-D7R

Single Jet Dry Dial Class C Hot Water Meter LXSC-D7R

Single Jet Dry Dial Hot /Cold Water meter R160 with Pluse output
Product Description
1. Small, light, dry register 8 numbered roller
2. Magnetic drive, lower transmission resistance
3. With retaining ring and lid
4. Nickel-plated body or painted
5. Register can rotate more than 360° For easily reading in any position
6. Pulse output may be 1 L/Pulse, 10L/ Pulse 10L/ Pulse

Compliance with Standard
Technical data conforms to ISO 4064 Class C (R160) Standard for horizontal installation
Options
1. U. S. Gallon(USG) for selecting
2. Meter for hot water up to 90 ºC is available
2. Impulse is available

Detailed information

Installation Requirements
1. The meter should be installed in horizontal position with the register face upwards
2. Pipeline must be flushed before installation
3. The meter should be constantly full of water during operation
Application
Measuring the volume of hot water passing through the pipeline
Working Conditions
1. Water temperature: ≤ 90°
2. Water pressure: ≤ 1.6MPa


Main technical data

Maximum Permissible Error:
1. In the lower zone from Qmin inclusive up to but excluding Qt is ± 5%
2. In the upper zone from Qt inclusive up to and including Qmax is ± 2%

C@8J419T_Y1E$@%(9EN08SX.png   


Please Attention:

1.If you want to get samples and catalogue from us, please contact us at info@sinoeco.com Normally, we need 7-15 days for making samples. and you need to pay for them. However, it would be highly appreciated if you can accept freight collect.
2.We normally need 20-35 days for production,however,please contact us if urgent
3.We ar OEM,ODM supplier,Wesupport FOB,CFR,DIF price term, and often ship from SHANGHAI or NINGBO sea port.
4.We encourage payment term:T/T or irrevocable L/C at sight, or 30% T/T deposit and 70% balance when receipt of advice of shipment.
5.Before installing the meter, we had better make sure that, it has been chosen correctly, check that the nominal diameter, flow rate, working temperature and pressure are compatible with the installation conditions.

Contact


Enquiry