• EMAIL:info@sinoeco.com
  • EN RU PT

Multi jet Liquid Sealed Register R160 Water Meter LXSY-E2P

Multi jet Liquid Sealed Register R160 Water Meter LXSY-E2P

Multi jet Liquid Sealed Register Water Meter

Meter material: brass / plastic
Model: LXSY-E2P

Features
1.With external regulating device
2.The register is contained in a liquid filled sealed housing which is not subject to discoloration by scale, dirt or any deposit
3.Liquid sealed register,Wet dial
4.Mechanical transmission movement equates to maximum reliability
5.Central strainer,Inlet strainer
  There are two versions DN50 meter body to be chosen: With threaded ends or flanged ends
  Particularly suited in lower quality water
6.Compliance with Standard
  Technical data conforms to
  ISO 4064 :1993 Class B /Class C
  ISO 4064: 2005 R80/R100/R160
  Standard for horizontal installation
7.Working Conditions
  Water temperature: 40
  Water pressure: 1.6MPa


Detailed information

Meter with non return valve(different price) is available except LXSY-50E2
Meter equipped with reed switch is available
Installation Requirements
The meter should be installed in horizontal position with the register face upwards
Pipeline must be flushed before installation
The meter should be constantly full of water during operation


Maximum Permissible Error (Class B):
In the lower zone from Qmin inclusive up to but excluding Qt is ± 5%
In the lower zone from Qt inclusive up to but excluding Qmax is ± 2%

Please Attention:

1.If you want to get samples and catalogue from us, please contact us at info@sinoeco.com Normally, we need 7-15 days for making samples. and you need to pay for them. However, it would be highly appreciated if you can accept freight collect.
2.We normally need 20-35 days for production,however,please contact us if urgent
3.We ar OEM,ODM supplier,Wesupport FOB,CFR,DIF price term, and often ship from SHANGHAI or NINGBO sea port.
4.We encourage payment term:T/T or irrevocable L/C at sight, or 30% T/T deposit and 70% balance when receipt of advice of shipment.
5.Before installing the meter, we had better make sure that, it has been chosen correctly, check that the nominal diameter, flow rate, working temperature and pressure are compatible with the installation conditions.

Contact


Enquiry