• EMAIL:info@sinoeco.com
  • EN RU PT

Water Meter Test Bench 5 meters serial 2 rows DN15-25

Water Meter Test Bench 5 meters serial 2 rows DN15-25


Water Meter Test Equipment Test Bench

Water Meter Test Instrument

Main technical parameter of Test Bench LS-3B 15-25mm
1.1 The test bench accuracy: 0.2
1.2 Tested water meter size:φ15, φ20, φ25.
1.3 Technical criteria for water meter testing: used for full capability test or produce and maintenance
1.4 Instantaneous flow index gauge is adopted glass rotor flowmeter group, the actual
measurement accuracy not less than 2.5%
1.5 Working volume container cubage: 15-25mm,(10L+10L)20L,(50L+50L)100L,
1.6 Using water source working pressure: 0.25-0.4MPa
1.7 Clamp equipment flex distance is: 50mm(15-25mm tester)
1.8 Appearance size: 15-25mm:3600×1650×2100 (in series meter tester)

Detailed information

2. Structure and working principle of Test Equipment
The water meter test bench is composed by work desk, clamp equipment, front and back straight pipe, flowmeter, standard volume container, drain water valve.
After the water from the steady sources come into the enter place of test equipment, the water will come into the tested meter in straight pipe, and then come into the choosed standard volume container, compare the reading number between tested meter and standard volume container, and get the error of testing water meter.

3. The pressure testing for water meter
1. Water enter valve for tester
2. two-position four-way valve (clamp or loose water meter)
3. pressure meter
4. two-position four-way valve (add or reduce pressure)
5. Cut-off pin valve (stop and keep pressure meter)
6. Water enter valve for flowmeter
7. flowmeter valve
8.Electromagnetis valve


Please Attention:

1.If you want to get samples and catalogue from us, please contact us at info@sinoeco.com Normally, we need 7-15 days for making samples. and you need to pay for them. However, it would be highly appreciated if you can accept freight collect.
2.We normally need 20-35 days for production,however,please contact us if urgent
3.We ar OEM,ODM supplier,Wesupport FOB,CFR,DIF price term, and often ship from SHANGHAI or NINGBO sea port.
4.We encourage payment term:T/T or irrevocable L/C at sight, or 30% T/T deposit and 70% balance when receipt of advice of shipment.
5.Before installing the meter, we had better make sure that, it has been chosen correctly, check that the nominal diameter, flow rate, working temperature and pressure are compatible with the installation conditions.